Applications

                              

BATCH & CONVEYOR TYPE UV PHOTO SURFACE PROCESSORS

Model: PM20012B-1
Exposure Area: 600 x 680mm
Number of UV Lamps: 12
Lamp Model: EUV200US-**
Lamp life Span: 5,000 hours
Built-in Power Supply
Water Cooling System
Alarm system
Touch Panel Control System
Power Supply: 200V AC, 3 Phase, 50/60 Hz

 
 1) Loading & Unloading View    2) UV Light Chamber view
 Note: This system can also be made for smaller exposure area or modified to customer application.

Model: PM1103C-4
 Number of Lamps: 3 tubes of 110W "W"shape
  Low Pressure Mercury Lamp

 Lamp Life Span: 5,000 hours
 Exposure Area: 270 x 300mm
 Power Supply: 200V AC, 3 phase, 50/60Hz, Can
   be placed at the side or under the table.

 Conveyor: Mesh type stainless steel
 Main Body Material: Stainless steel
 Cooling system: Water Cooling system
 With Exhaust Blower
    1) Full view            2) UV Light Chamber view
Note: This model can be made for wider and longer exposure area or modified to accommodate the power supply. 

Model: PM907B-3
 Exposure area with 7 tubes of 90W lamps
 An exposure area of 320 x450mm.

 Built-in Power supply
 Exhaust blower
 Water cooling System
 Touch Screen control panel

 Power Supply: 200V AC, 50/60Hz.

        1) Full view            2) UV Light Chamber view

 All Stainless Steel Double chamber UV Photo
   surface Processor 
 All Stainless Steel Roller Conveyor

 10 tubes of 200W "W" shape Low Pressure Mercury
   Lamp per chamber

 Each chamber has an effective exposure area of 360mm
   by 1390mm

 Built-in 200V AC, 3 Phase, 50/60 Hz Power Supply
 Water Cooling System and full Exhaust Blower to ventilate
    Ozone
& the heat
  
     Conveyor type with Bouble UV Light Chabmer
 This system can be integraded into a full automated loading and unloading system.It also can be designed and made for smaller exposure area.

           
 Double Chamber, Both Side Exposure, Conveyor type Photo Surface Processor          Light Chamber view
 
 A similar UV double chamber Conveyor type UV Photo Surface Processor to process both side of substrates.
 Each chamber is equipped with 14 tubes of 200W "U" shape UV lamp to provide 680mm x 700mm exposure area.
 The main body is not stainless steel, but both chamber and rollers on the conveyor are made by stainless steel.
 Built-in power supply with water cooling system and high power blower to exhaust the Ozone out.
 The advantage of this sytem is that the both side exposure enables the system to handle higher substrates resulting
    in higher production in shoeter time.

                 
Manual Batch Type Photo Surface Processor       Light Chamber View        Exposure Area (Drawer Type)
 
 Batch Type, Manual UV Photo Surface Processor.
 6 Tubes of 200W "U" shape Low Pressure Mercury Lamp
 An effective Exposure Area of 300mm x 680mm
 Built-in Power Supply and Cooling System
 Drawer Type Exposure Area will allow a safe and easy operation.

 
Other Models
 
             
 
 Batch Type UV Photo Surface Processors:
  Custom made with various type and number of lamps to provide
  a small to large exposure area for any type and size of substrates.
  • UV Lamps with more than 5,000 hours effective life span
  • Built in Power supply
  • Water Cooling System
  • Lamp burnt out alarm system
  • Touch Panel control system
  • Separate switches for each lamp to save energy
  • Low Cost & easy to maintain

   

 Table top UV Surface Treatment System
            
      Model PL17-110                      Model PL-16-110    Model: PL200N-47(Two side exposure)
 Table top UV Surface Treatment System
 One side Exposure:
  • A 110W Grid UV lamp made by synthetic quartz glass with provide an effective exposure area of 150mm x 150mm.
  • Compact and easy to use. Mostly used for experiment by universities and R&D Laboratories, but it also can be used on poduction lines.
  • Equipped with a shutter to block the UV light each time the substrate is being replaced.
  • Equipped with a laboratory jack inside the tool to adjust the distance between the lamp to surface of substrate from 0 to 80mm.
  • A full set with power supply, Exhaust blower, Exhaust hose x 2
  • Power supply 100V AC, 50/60Hz Also can be made for 200V AC 50/60Hz
 Two Sides Exposure:
  • Two 200W UV Lamps separately controlled
  • The distance between the lamp and substrate can be adjusted
  • To process both sides of camera lens or Magnetic Storage disks
  • Interchangeable tray for different applications (additional trays can be made on requests).
  • Full set with, power supply, Exhaust blower, Exhaust hose x 2
  • Power supply 100V AC, 50/60Hz Also can be made for 200V AC 50/60Hz 
 
 
Other UV Products
  Low Pressure Mercury (UV) Lamps
  High Pressure Mercury (UV) Lamps
  UV Photo Surface Curing Systems
  Compct UV Surface Curing Systems
  UV/Ozone Water Treatment Systems
  Compact Water Treatment Systems